High-energy LED lights

High-energy LED lights MSN:[email protected] http://www.hx-group.net TEL:86-18664939845/86--0755-28896661 Details Input Voltage: AC 170V-250V50HZ/60HZ Power: 60W Color Temperature: 5000k-7000k Luminous Flux:> 6000LM Protection class: IP65 1, LED lamps light the way their own characteristics, the absence of diffuse light and ensure the efficiency of light; 2, LED lights have a unique secondary optical design, LED lighting, street lamp light shines on the area needed to further improve the light efficiency to save energy; 3, LED light source efficiency currently stands at 90-110lm / W, but there is still much room for development, theoretical value of 250lm / W. The high pressure sodium light-emitting efficiency is only increased with the power to increase, therefore, the overall light efficiency LED lights stronger than the high-pressure sodium lamp; (the overall effect is the theory of light, in fact, more than 250W high pressure sodium light efficiency than LED) . 4, LED street light color than the high-pressure sodium lamp is much higher, high pressure sodium color index is only 23, while the LED lights color rendering index of 75 or more, from the visual psychological point of view, to achieve the same brightness, LED street lamp illumination average of lower than 20% of high-pressure sodium lamp; 5, LED street lamp light is small, one-year decline of less than 3% of light, the use of 10 years still to road illumination requirements, and decline of large high pressure sodium lights, about a year, has fallen more than 30%, therefore, LED street lamps in the using the design of power than the high pressure sodium lamps can be low; 6, LED lights with automatic control of energy-saving device, to achieve different times to meet the lighting requirements in the case of the maximum possible reduction in power to save energy. 7, LED is a low-voltage devices to drive the voltage of single LED safe voltage power products are all single 1 watt LED, so it is a more secure than the use of high voltage power supply, especially for public places (such as: street lights lighting, factory lighting, automotive lighting, commercial lighting, etc.). 8, each unit is only a very small volume of small pieces of LED, it can be prepared into various forms of devices, and for the environment variable. 9, long life: more than 50,000 hours can be used to provide three years of quality assurance. Inadequacy is the power of life can not be guaranteed. 10, high light efficiency: ≥ 100LM used more than chips, compared to conventional energy-saving high-pressure sodium lamps to more than 75%. ll, easy to install: No need rectifiers Jiamai cable directly to the street lamp poles connected to or installed in the original nest lamp will light shell. 12, thermal control, well: the summer temperature at 45 degrees below, and passive cooling mode. 13, reliable: the power circuit used in all high-quality components, and every single LED has a separate over-current protection, without fear of damage. 14, light-color uniform: without lens, not to increase the brightness at the expense of uniform light color, so as to ensure no light imprison light color uniform.